[System Mode] - Panasonic AJ-PX380G Operating Instructions Manual

Memory card camera recorder
Hide thumbs Also See for AJ-PX380G:
Table of Contents

Advertisement

Item
[HI-COLOR SW]
[HI-COLOR LVL]
[WHITE CLIP SETTING]
[WHITE CLIP]
[WHITE CLIP LVL]
[Rch CLIP LVL]
[Bch CLIP LVL]
[DRS EFFECT DEPTH]
[A.IRIS LEVEL]
[A.IRIS LEVEL EFFECT]

[SYSTEM MODE]

Configure the settings regarding the recording format of video and audio.
Item
[LINE&FREQ]
[REC FORMAT]
[CAMERA MODE]
[AUDIO SMPL RES]
[REC SIGNAL]
[ASPECT CONV]
[SCAN REVERSE]
Chapter 6 Menu Operations — Menu list
Turns the mode that expands the color dynamic range [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
Selects the level of the mode that expands the color dynamic range.
[1]...[32]
f Factory setting: [16]
Turns the white clip function [ON]/[OFF]. This enables the [WHITE CLIP LVL] setting value when the
function is [ON].
[ON], [OFF]
f Factory setting: [ON]
Sets the white clip level.
[90%]...[109%]
f Factory setting: [109%]
Sets the clip level Rch for the white clips.
[−31]...[31]
f Factory setting: [0]
Sets the clip level Bch for the white clips.
[−31]...[31]
f Factory setting: [0]
Sets the compression level of the high-brightness areas of the dynamic range stretcher function. By
compressing the video signal levels of the high-brightness areas that are blown out in normal shooting, the
dynamic range can be expanded.
[1], [2], [3]
f Factory setting: [1]
Enables/disables the auto iris level function.
[ON], [OFF]
f Factory setting: [ON]
Adjusts the brightness in the auto iris mode. Increase the value to brighten, and decrease the value to
darken the convergence of auto iris.
[−50]...[50]
f Factory setting: [0]
Sets the signal format of the camera. If this setting has been changed, select [YES] on a confirmation
message and restart the camera.
[1080-59.94P], [1080-50P], [1080-59.94i], [1080-50i], [1080-23.98PsF], [720-59.94P], [720-50P],
[480-59.94i], [576-50i]
Selects the codec for recording and the mode for shooting and recording.
[AVC-I100/60P], [AVC-I100/60i], [AVC-I100/50P], [AVC-I100/50i], [AVC-I100/30PN], [AVC-I100/24PN],
[AVC-I100/25PN], [AVC-I50/60P], [AVC-I50/60i], [AVC-I50/50P], [AVC-I50/50i], [AVC-G50/60P],
[AVC-G50/60i], [AVC-G50/50P], [AVC-G50/50i], [AVC-G50/30PN], [AVC-G50/24PN], [AVC-G50/25PN],
[AVC-G25/60P], [AVC-G25/60i], [AVC-G25/50P], [AVC-G25/50i], [AVC-G25/30PN], [AVC-G25/24PN],
[AVC-G25/25PN], [AVC-G12/60P], [AVC-G12/60i], [AVC-G12/50P], [AVC-G12/50i], [AVC-G12/30PN],
[AVC-G12/24PN], [AVC-G12/25PN], [DVCPRO HD/60P], [DVCPRO HD/60i], [DVCPRO HD/50P],
[DVCPRO HD/50i], [DVCPRO50/60i], [DVCPRO50/50i], [DVCPRO/60i], [DVCPRO/50i], [DV/60i],
[DV/50i]
Sets the camera shooting mode while in the SD mode.
[60i], [50i], [30P], [25P]
Selects the number of audio bits ([24BIT] or [16BIT]) when [REC FORMAT] is [AVC-I100] or [AVC-I50].
At [REC FORMAT] other than these, recording is performed at the number of audio bits fixed to 24 bits or
16 bits.
[16BIT], [24BIT]
f Factory setting: [16BIT]
Switches the input signal.
[CAM]: Records the camera shooting signal of the camera.
[SDI]: Records the input signal from the <SDI OUT2/IN> terminal. The setting of the <SDI OUT2/IN>
terminal is automatically set to [SDI IN], and the main menu → [IN/OUT SEL] → the [SDI OUT2/IN SEL]
setting is disabled.
Supporting video format
HD: 1080/59.94i, 1080/50i, 720/59.94P, 720/50P
SD: 480/59.94i, 576/50i
Supporting audio format
Refer to "Digital audio" (page 220).
f Factory setting: [CAM]
Once the power is turned off, it is always set to [CAM] the next time power is turned on.
Selects the aspect ratio of the video to be recorded in 480i, 576i.
[SIDE CROP], [LETTER BOX], [SQUEEZE]
f Factory setting: [SIDE CROP]
Enables/disables the scan reverse shooting function for vertical/horizontal inversion of images.
[ON], [OFF]
f Factory setting: [OFF]
– 135 –
Description of settings
Description of settings

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents