Panasonic AJ-PX380G Operating Instructions Manual page 30

@ NOTE
t When both the battery and the external DC power supply are connected, the power supply from the external DC power supply has priority. The battery
may be removed while using the external DC power supply.
t When using an external DC power supply, be sure to turn the camera's <POWER> switch to <ON> after turning on the <POWER> switch of the
external DC power supply. If the operations are performed in reverse, the camera may malfunction because the external DC power supply output
voltage rises too slowly.
t When power is supplied from the <DC IN> terminal, the light circuit does not function. The light circuit can be used only when power is supplied from
the Anton/Bauer battery plate.
t When connecting the battery to the <DC IN> terminal, set the type of battery using the main menu → [BATTERY SETUP] → [EXT DC IN SELECT]. In
this case, the remaining battery level is not displayed with % even when the battery has the battery level indicator function.
Chapter 3 Preparation — Power supply
DC IN
1
2
3
4
Manufacturer Parts No.: HA16RX-4P (SW1) (76) (Hirose Electric Co.)
– 30 –
GND
NC
NC
+12 V
Panasonic Parts No.: K1AA104H0038