Panasonic AJ-PX380G Operating Instructions Manual page 214

Display
[CANNOT REPAIR IN SELECTION!]
[CANNOT REPAIR!]
[CANNOT SAVE!][FILE NAME IN USE]
[CARD FULL!]
[COPY IMPOSSIBLE. TOO LARGE CLIP
CONTAINED!] [CLIP NAME:] (clip name)
[INVALID VALUE!]
[INVALID DELETE]
[LACK OF CAPACITY!]
[MISSING CLIP!]
[NO CARD!]
[NO COPY TO SAME CARD!]
[NO FILE!]
[NO INPUT!]
[NO SD CARD!]
[NOT SELECTED!]
[SAME CLIP IS SELECTED!]
[TOO MANY CLIPS!]
[UNKNOWN CONTENTS FORMAT!]
[UNKNOWN DATA!]
[USER CLIP NAME MODIFIED!]
[WRITE PROTECTED!]
During soft keyboard operation
Display
[AUTHENTICATION ERROR!]
[CANNOT CHANGE!]
[CANNOT SET!]
[INVALID VALUE!]
[CANNOT SET!]
[NO INPUT!]
[CANNOT SET!]
[RETRY PASSWORD IS DIFFERENT!]
During USB host mode
Message
[CANNOT ACCESS CARD!]
[CANNOT ACCESS TARGET!]
[CANNOT COPY!][FORMAT STORAGE
DEVICE TO FAT]
[CANNOT FORMAT!]
[CANNOT RECOGNIZE STORAGE
DEVICE!]
[CANNOT SELECT!][MAX. 6 PARTITIONS]
[CARD IS EMPTY! CANNOT COPY!]
[FORMAT P2 CARD!]
Chapter 11 Maintenance — Warning system
Description
Some of the selected clips cannot be repaired.
Content that cannot be repaired is selected.
A settings file of the same name exists on the SD
memory card.
The P2 card or SD memory card is full.
Files exceeding 4 GB cannot be copied to P2 memory
cards or microP2 memory card with 32 GB or smaller
capacity.
The data value you entered is invalid.
The clip recorded last cannot be deleted with the last
clip delete function.
There is not enough recording capacity left on the card.
Shot marks cannot be attached to the clips unless all
clips recorded over multiple P2 cards are present.
No P2 or SD memory card is inserted.
A clip cannot be copied to the card storing the original
clip.
The specified file does not exist.
No data is entered.
No SD memory card.
Attempted to delete without selecting clips.
Multiple instances of the same clip (copies) are included
in the clips selected.
Too many clips are selected.
This is a warning of the contents for the version that is
not supported by the camera.
You cannot write back only proxy recording clips from
the FTP server to the P2 card.
The metadata character code is invalid.
There is a problem with data in the file.
When adding a counter value to the clip name,
characters must be deleted.
The P2 card or SD memory card is write-protected.
Description
Manual authentication failed.
An attempt is made to enter the [PERSON] item (user
who enters the memo) when there is no text memo.
The entered value is invalid.
There is not input to the software keyboard.
The re-entered password is different.
Description
An error occurred while accessing the P2 card.
An error occurred while accessing the connection target. Check the storage device status and connection.
The partition that can copy clips does not exist on the
storage device.
The storage device cannot be formatted.
The storage device is not correctly recognized.
Storage devices with more than six partitions cannot be
selected (mounted simultaneously).
The P2 card to copy is empty.
Cannot import to a P2 card containing clips.
– 214 –
Behavior and cause
Check the selected content.
Check the selected content.
Use another name to save the file.
Insert a card with free space available.
Copy to a microP2 memory card with 32 GB or larger
capacity.
Enter data within the normal range.
To close the dialog, press the [SET] button.
For details on conditions that clip cannot be deleted,
refer to "Final clip delete function" (page 107).
Insert a card with sufficient recording capacity.
Insert all P2 cards over which recording extended.
Insert the relevant media.
Copy the selected clip to a card that does not contain
the original clip.
Check the file.
Enter data and then set.
Insert an SD memory card.
Select clips to delete.
Multiple instances of the same clip (copies) cannot be
copied simultaneously. Remove instances of the same
clip from selected items.
Reduce the number of selected clips.
Match the device and content versions.
Write back (import) proxy recording clips to an SD
memory card.
The metadata character code is UTF-8. Enter valid
characters using a viewer.
Create the file again.
For the counter addition setting, the user clip name plus
the counter value can only contain up to 100 bytes.
Characters in the clip name are automatically deleted
when the total number of characters exceeds this limit.
Insert write-accessible media.
Behavior and cause
Enter the correct password.
Enter the [TEXT] (text information) first.
Change the input value.
Enter the password.
Enter the correct reference password.
Measure
Check the P2 card.
Reformat in FAT format, or export the P2 card to create
a partition.
Change the connected storage device.
Reboot the storage device or connect another storage
device.
Release selected partitions.
The copy operation is not performed because the card
is empty.
Format the P2 card.