Table of Contents
Advertisement
Menu list
: Can be saved and loaded as a scene file data.
: Can be saved and loaded as a user file data.
: Can be saved and loaded as an operation file data.
: Can be saved and loaded as a reference file data.
[DISPLAY SETUP]
[MARKER]
Item
[FOCUS ASSIST SW]
[FOCUS ASSIST MODE] —
[CANCEL TIME]
[FOCUS ASSIST]
—
[IN RED SW]
[IN RED COLOR]
[SQUARE SW]
[SQUARE COLOR]
[BAR SW]
[BAR MODE]
[BAR COLOR]
[BAR POSITION]
[MAG SW]
[ZEBRA]
—
[ZEBRA1 LEVEL]
[ZEBRA2 LEVEL]
[ZEBRA PATTERN]
[FRAME LEVEL
—
SWITCH]
[FRAME LEVEL]
[FRAME MARK SWITCH]
[FRAME SIG]
Chapter 4 Menu Operations — Menu list
Enables/disables the focus assist.
[OFF], [ON]
• • Factory setting: [OFF]
Sets whether to cancel the focus assist by the switch or by the duration of time.
[SW], [INSTANT]
• • Factory setting: [SW]
Sets the duration of time before cancelling the focus assist when [INSTANT] is selected.
[1sec], [3sec], [5sec], [10sec], [20sec]
• • Factory setting: [5sec]
Displays the type of the focus assist.
Enables/disables the IN RED.
[OFF], [ON]
• • Factory setting: [OFF]
Sets the color for IN RED.
[RED], [GREEN], [BLUE], [WHITE]
• • Factory setting: [RED]
Enables/disables the SQUARE.
[OFF], [ON]
• • Factory setting: [OFF]
Sets the color for the SQUARE.
[RED], [GREEN]
• • Factory setting: [GREEN]
Enables/disables the BAR.
[OFF], [ON]
• • Factory setting: [OFF]
Sets the appearance of the focus bar.
[NORMAL], [THICK]
• • Factory setting: [NORMAL]
Sets the color of the bar when [BAR MODE] is set to [THICK].
[WHITE], [RED], [BLUE], [GREEN]
• • Factory setting: [WHITE]
Sets the display position of the bar when [BAR MODE] is set to [THICK].
[UPPER], [UNDER], [RIGHT], [LEFT]
• • Factory setting: [UNDER]
Enables/disables the magnification display function.
[OFF], [ON]
• • Factory setting: [OFF]
Enables/disables the luminance zebra.
[OFF], [ON]
• • Factory setting: [OFF]
Sets the level of the luminance zebra 1.
[0%]...[109%]
• • Factory setting: [80%]
Sets the level of the luminance zebra 2.
[0%]...[109%]
• • Factory setting: [100%]
Sets the pattern of the luminance zebra.
[1], [1+2], [SPOT]
• • Factory setting: [1]
Shows/hides the level display outside the frame marker.
[OFF], [ON]
• • Factory setting: [OFF]
Sets the level to be displayed outside the frame marker.
[0]...[31]
• • Factory setting: [31]
Shows/hides the frame marker.
[OFF], [ON]
• • Factory setting: [OFF]
Sets the aspect ratio of the frame marker.
[4:3], [13:9], [14:9], [15:9], [16:9], [CINEMA], [VISTA]
• • Factory setting: [4:3]
– 39 –
Description of settings
Advertisement
Table of Contents
