Panasonic AJ-PX380G Operating Instructions Manual page 145

Item
[PLAYLIST]
[IP REMOTE]
[USER ACCOUNT]
[ACCOUNT LIST]
[FTP CLIENT SERVICE] [SETTING DATA]
f [SERVER URL]
f [LOGIN USER]
f [LOGIN PASSWORD]
f [SSH]
f [SSH PORT]
f [LOAD (SD CARD)]
f [SAVE (SD CARD)]
[REC DURING
UPLOAD]
[AUTO COPY]
[UPLOAD LIST]
[SAVE LOG (SD CARD)] Save up to the latest 1000 logs for clip information (month and date, clip number (global clip ID), status)
[STREAMING SETTING] [START TRIGGER]
[SETTING DATA]
[SERVER ADDR.]
[RTSP PORT]
[LOAD (SD CARD)]
[SAVE (SD CARD)]
[START]
[LAN PROPERTY] [MAC ADDRESS]
[DHCP]
[IP ADDRESS]
Chapter 6 Menu Operations — Menu list
Sets entering/exiting of the playlist edit mode.
[ON], [OFF]
f Factory setting: [OFF]
[ENABLE]: Enables remote control with IP connection.
[DISABLE]: Disables remote control with IP connection.
f Factory setting: [DISABLE]
Sets the user account name.
Displays the currently set user account name. Registering of new accounts, deleting accounts, or changing
password can also be performed.
Sets the source from where client service settings are acquired.
[INTERNAL]: Uses the setting value set on the camera.
[SD CARD]: Uses the setting value of the file inside the SD memory card inserted in the SD card slot.
When this item is set to [SD CARD], insert an SD memory card before turning on the power of the camera.
f Factory setting: [INTERNAL]
Sets the server name or an address to connect to.
Sets the user ID to connect to.
Sets the password to connect to.
The menu setting value is displayed with [*].
Sets when transferring files using SSH.
[ENABLE]: Uses SSH.
[DISABLE]: Does not use SSH.
f Factory setting: [DISABLE]
Sets the network port number when SSH is used. Set the same number as that of the server side.
The menu setting value is displayed with [*].
f Factory setting: [22]
Loads the setting value of the client service from the SD memory card.
Saves the setting value of the client service onto the SD memory card.
Sets whether to use the rec during upload function.
[ENABLE]: Uses the rec during upload function.
[DISABLE]: Does not use the rec during upload function.
f Factory setting: [DISABLE]
Sets whether to enable the function to register clips recorded using the camera automatically to the upload
list when recording stops, and if enabled, sets the type of target clip.
[REC CLIP(PROXY)]: Upload target is proxy data of recorded clips.
[REC CLIP]: Upload target is recorded clips (main recording data and proxy data).
[DISABLE]: Does not automatically upload recorded clips.
f Factory setting: [DISABLE]
Displays the list information of clips to upload.
registered in the upload list to an SD memory card.
Sets the method for starting video streaming.
[CAMERA]: Starts/stops streaming from the camera.
[RECEIVER]: Operates the start/stop of the streaming distribution from the terminal on the network using
the P2 Browser or the P2 Streaming Receiver.
f Factory setting: [RECEIVER]
Sets the source from where settings for streaming is acquired when [CAMERA] is selected in [START
TRIGGER].
[INTERNAL]: Uses the setting value set on the camera.
[SD CARD]: Uses the setting value of the file inside the SD memory card inserted in the SD card slot.
When this item is set to [SD CARD], insert an SD memory card before turning on the power of the
camera.
f Factory setting: [INTERNAL]
Sets the IP address of the device receiving the streaming video when [CAMERA] is selected in [START
TRIGGER].
Sets the RTSP port number required for streaming when [CAMERA] is selected in [START TRIGGER].
f Factory setting: [554]
When [CAMERA] is selected in [START TRIGGER] and [INTERNAL] is selected in [SETTING DATA], the
connection information necessary for streaming distribution is loaded from the SD memory card.
When [CAMERA] is selected in [START TRIGGER] and [INTERNAL] is selected in [SETTING DATA], the
connection information necessary for streaming distribution is saved to the SD memory card.
When [CAMERA] is selected in [START TRIGGER], the streaming distribution is started/stopped from the
camera.
[ON]: Starts streaming.
[OFF]: Stops streaming.
Displays the MAC address of the <LAN> terminal on the camera. (Cannot be changed.)
Sets whether to use automatic acquisition via DHCP. (Mutually exclusive with [DHCP SERVER] setting)
[ENABLE]: Uses automatic acquisition.
[DISABLE]: Does not use automatic acquisition. Set [IP ADDRESS], [SUBNET MASK], [DEFAULT
GATEWAY], [PRIMARY DNS], and [SECONDARY DNS].
f Factory setting: [ENABLE]
Sets the IP address when [DISABLE] is selected in [DHCP].
f Factory setting: [192.168.0.1]
– 145 –
Description of settings