Adjusting The White And Black Balance - Panasonic AJ-PX380G Operating Instructions Manual

r Message displayed in the viewfinder
Status
During adjustment
Adjustment completed
@ NOTE
t During black balance adjustment, the aperture is set to automatically shut out light.
t During recording, black balance cannot be adjusted.
t During the automatic black balance execution, recording to the P2 card is not performed by pressing the <REC> button.
t The gain switching circuit is automatically switched during black balance adjustment. Flicker or noise sometimes appears on the viewfinder screen.
This is not a malfunction.
Black balance memory
Values stored to memory are saved even if the camera is turned off.
Chapter 4 Shooting — Adjusting the white and black balance
Message
[ABB ACTIVE]
[ABB OK]
– 62 –
Remark
f The adjusted value is automatically stored in
memory.