Panasonic AJ-PX380G Operating Instructions Manual page 137

Item
[ATW TARGET R]
[ATW TARGET B]
[W.BAL PRESET]
[W.BAL VAR]
[FOCUS ASSIST MODE]
[FOCUS IN COLOR [PEAKING COLOR]
SETTING]
[PICTURE B/W]
[EXPAND MODE]
[IRIS GAIN]
[IRIS GAIN VALUE]
[A.IRIS WINDOW]
[AGC]
[AGC LIMIT]
[AGC POINT]
[AUTO KNEE SW]
[WFM MODE]
[BARS TYPE]
Chapter 6 Menu Operations — Menu list
Finely adjusts the Rch output for convergence with auto tracking white balance operation.
[−10]...[10]
f Factory setting: [0]
Finely adjusts the Bch output for convergence with auto tracking white balance operation.
[−10]...[10]
f Factory setting: [0]
Sets the color temperature to be assigned to the <PRST> position of the <WHITE BAL> switch.
[3200K], [5600K], [VAR]
f Factory setting: [3200K]
Sets the value of [VAR] in [W.BAL PRESET].
It can also be operated by the jog dial button.
Enabled when [W.BAL PRESET] is set to [VAR] and the <WHITE BAL> switch is at <PRST>.
[2000K]...[15000K]
f Factory setting: [3200K]
Sets the operation mode of the focus assist function.
[EXPAND]: The center of the viewfinder is displayed enlarged.
[FOCUS IN COLOR]: Outlines the contour of the video in color.
f Factory setting: [EXPAND]
Selects the color of contour when [FOCUS IN COLOR] is selected in [FOCUS ASSIST MODE].
[RED]: Outlines the contour in red.
[GREEN]: Outlines the contour in green.
[BLUE]: Outlines the contour in blue.
f Factory setting: [RED]
Selects either color or black and white for the image when [FOCUS IN COLOR] is selected in [FOCUS
ASSIST MODE].
[ON]: Displays the image in black and white.
[OFF]: Displays the image in color.
f Factory setting: [OFF]
Selects the method to cancel expanded display when [EXPAND] is selected in [FOCUS ASSIST MODE].
[10SEC]: Cancels in 10 seconds.
[HOLD]: Does not cancel until the <FOCUS ASSIST> button is pressed again.
[UNTIL REC]: Cancels when recording starts. Expanded display is not available during recording.
f Factory setting: [10SEC]
Sets whether to perform the iris correction on the camera or on the lens.
[CAM]: Performs the iris correction on the camera.
[LENS]: Performs the iris correction on the lens.
f Factory setting: [CAM]
Sets the adjustment value of [IRIS GAIN]. When [CAM] is selected in [IRIS GAIN], this setting is enabled.
[1]...[20]
f Factory setting: [10]
Selects the auto iris detection window.
[NORM1]: Window that is near screen center.
[NORM2]: Window that is near screen bottom.
[CENTER]: Window that is a spot in the screen center.
f Factory setting: [NORM1]
Sets the operation of the auto gain control.
[ON]: Performs the operation of the [AGC] function that automatically adjusts camera gain.
[OFF]: Does not perform the operation of the [AGC] function that automatically adjusts camera gain.
f Factory setting: [OFF]
Sets the maximum gain value during [AGC] operation.
[3dB], [6dB], [12dB], [18dB]
f Factory setting: [12dB]
Sets the F value to switch control from auto iris to [AGC] during [AGC] operation.
[F2.8], [F4.0], [F5.6]
f Factory setting: [F2.8]
Enables/disables the auto knee and dynamic range stretcher functions.
[DRS]: Activates the dynamic range stretcher function when the <OUTPUT>/<AUTO KNEE> selector
switch is set to <ON>.
[ON]: Activates the auto knee function when the <OUTPUT>/<AUTO KNEE> selector switch is set to
<ON>.
[OFF]: Does not activate the auto knee and dynamic range stretcher functions when the
<OUTPUT>/<AUTO KNEE> selector switch is set to <ON>.
f Factory setting: [ON]
Selects the type of waveform to be displayed in the viewfinder when the USER button to which the [WFM]
function is assigned is pressed.
[WAVE]: Displays as a waveform.
[VECTOR]: Displays as a vector.
[WAVE/VECTOR]:The display changes in order of (no display) → [WAVE] (waveform) → [VECTOR]
(vector) → (no display) every time the USER button assigned with [WFM] is pressed.
f Factory setting: [WAVE]
Selects the color bar to use.
[SMPTE]: Uses the color bar in the SMPTE standard.
[FULL BARS]: Uses full color bars.
[SPLIT]: Uses SPLIT color bars for SNG (Satellite News Gathering).
[ARIB]: Uses ARIB standard color bars.
f Factory setting: [SMPTE]
– 137 –
Description of settings