Function Keys For Remote Maintenance Access - Aastra 415 System Manual

Configuration
Note:
In a QSIG network it is important to ensure that the authorization to
change the remote maintenance access is also denied to unauthorized
PISN users. Otherwise, a PISN user would be able to use an abbreviated
dialling number defined for the destination PINX and containing the
appropriate function code to change the remote maintenance access to
the destination PINX.
Aastra Intelligent Net:
In an AIN the remote maintenance access of all the nodes depends on the
setting in the Master. If remote maintenance access is enabled in the Mas-
ter, both the AIN configuration and the offline configuration of the satel-
lites are enabled.
Remote maintenance access via an external dial-up connection to the
AIN is also secured and has to be explicitly enabled (see
bling the dial-up connection to the AIN", page
whether dial-up access is via a satellite or directly to the Master.
5. 4. 3

Function keys for remote maintenance access

On system phones (with the exception of Office 10) the function code for enabling/
barring remote maintenance access can be stored under a function key, provided
the user has the appropriate authorization.
The relevant LED lights up if remote maintenance access is enabled once or perma-
nently.
The relevant LED goes off as soon as remote maintenance access is denied again,
either automatically or manually, using the function code, WebAdmin or the sys-
tem assistant on Office 45.
174
"Enabling / disa-
215). This is irrespective of
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014