Cabling Interfaces; Port Addressing - Aastra 415 System Manual

4. 7

Cabling interfaces

All the interfaces are routed to the front panel and are therefore accessible without
opening the communication server.
Fig. 30 Interfaces on the front panel with port designation (Aastra 430)
4. 7. 1

Port addressing

A port address is always of the type x.y. x is the number of the card slot, and y, the
port number.
The slot numbering begins with 0 (=mainboard) and ends with 2 (for Aastra 415) or
4 (for Aastra 430).
With BRI-S interface and DSI interface addresses, the terminal selection digit (TSD)
is relevant, in addition to the slot and port numbers. This is always -1 in analogue
terminal interfaces.
Tab. 38 Examples of interface addressing
Slot
Mainboard; DSI interface x.5
Interface card on slot IC1; interface x.3
Terminal with TSD2 on interface card in IC3; interface x.4
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
Installation
Port address
0.5
1.3
3.4-2
105