Snmp Trap Station - Planet Networking & Communication WGSW-48000 User Manual

4.9.5 SNMP Trap Station

Configure SNMP trap on this page. The SNMP Trap Configuration screen in
The page includes the following fields:
Object
• Trap Station ID
• Community String
• Link Change Trap
• Remote IP Address
• Boot Up Trap
•
Version
•
Add New Trap Station
Figure 4-9-7 SNMP Trap Station
Figure 4-9-8 Add new SNMP Trap Station
Description
Click on Trap Station ID to edit or remove trap station.
Indicates the community string for this trap station.
Indicates if link up and link down traps are sent.
Indicates the IP address which traps are sent.
Indicates if WarmStart and ColdStart traps are sent.
Indicates the SNMP version of the trap station.
Creates a trap station.
128
User's Manual of WGSW-48000
Figure 4-9-7 and Figure 4-9-8 appears.