Planet Networking & Communication WGSW-48000 User Manual page 54

The page includes the following fields:
Object
• LACP System Priority
• Port Number
• Priority
• Admin Key
• LAG Group
•
Status
•
LACP Port Priority
Figure 4-3-4 LACP Property
Description
Specifies the actor device's link aggregation priority relative to the devices at the
other ends of the links on which link aggregation is enabled. A higher value
indicates a lower priority.
Display the port number. Click on the index number will enter port LACP
properties configuration screen.
Indicates actor port priority. The port priority determines the active and standby
links. When a group of ports is negotiating with a group of ports on another
device to establish a trunk group, the port with the highest priority becomes the
default active port. The other ports (with lower priorities) become standby ports in
the trunk group.
Indicates actor administration key for the port. The LACP administration key must
be set to the same value for ports that belong to the same LAG.
Indicates the LAG group ID if the port is the member of this LAG group.
Summarizes the current LACP status for this port.
Specifies actor port priority. The port priority determines the active and standby
links. When a group of ports is negotiating with a group of ports on another
device to establish a LAG group, the port with the highest priority becomes the
default active port. The other ports (with lower priorities) become standby ports in
the LAG group. You can specify a priority from 0 to 65535.
54
User's Manual of WGSW-48000