Exit - Planet Networking & Communication WGSW-48000 User Manual

6.3 Global Config mode commands

exit

Description:
This command is used to exit current shell
Syntax:
exit
Mode
Global Config
6.3.1 VLAN Command
This command is used to configure vlan
vlan add
Description:
This command is used to create a new vlan or some vlans
vlan add number
Description:
This command enter a vlan ID
Syntax:
vlan add number <vlan-ID>
Parameters:
<vlan-ID>
Mode
Global Config
vlan add range
Description:
This command enter a range of vlan ID
Syntax:
vlan add range from < vlan-ID > to <vlan-ID>
Parameters:
< vlan-ID > to <vlan-ID>
Mode
Global Config
198
User's Manual of WGSW-48000