Ping Function - Planet Networking & Communication WGSW-48000 User Manual

• Level
• Category
• Time
• Message

4.11.13 Ping Function

This page allows you to issue ICMP PING packets to troubleshoot IP connectivity issues.
After you press , 4 ICMP packets are transmitted, and the sequence number and roundtrip time are displayed upon reception of
a reply. The page refreshes automatically until responses to all packets are received, or until a timeout occurs. The ICMP Ping
screen in Figure 4-11-13 appears.
The page includes the following fields:
Object
• Host IP Address
Be sure the target IP Address is within the same network subnet of the switch, or you had setup the
correct gateway IP address.
4.11.14 Cable Diagnostic
The accuracy for detecting fault free cable length is within +/- 5 meters normally. However, under the following conditions, the
fault free cable length detection accuracy can be beyond 5 meters limit. The frequency of this occurrence is very low.
1. The remote link partner has a termination incompatible with IEEE 802.3 specification (100 Ω).
Indicates the severity of the log.
Indicates the facility/category that the log belongs to.
Indicates the time when the log is recorded.
Shows the detailed description of the log.
Figure 4-11-13 Ping Function
Description
The destination IP Address.
150
User's Manual of WGSW-48000