Rate Control - Planet Networking & Communication WGSW-48000 User Manual

4.8.5 Rate Control

Configure the switch port rate limit for Policers and Shapers on this page. The settings relate to the Managed Switch, as
reflected by the page header. The screen Rate Control in
The page includes the following fields:
Object
• Port
• Ingress Rate
• Egress Traffic
Shaping
Figure 4-8-10
Figure 4-8-10 Rate Control configuration screenshot
Description
Selects a port to configure.
Selects a rate for incoming traffic.
The selectable values are 64kbps / 128kbps / 256kbps ~ 400Mbps.
Egress Traffic Shaping is an attempt to control network traffic in order to optimize or
guarantee performance, low-latency, and/or bandwidth.
• Rate:
displays the rate for egress traffic. And it's value comes from
tokens.
• Tokens Added
means tokens will be added to the token bucket in "token update
Per Interval: interval"
• Token Update
is 7.8125 us. And each token represents 0.5 bit.
Interval:
• Burst Size:
selects the size of burst.
120
User's Manual of WGSW-48000
appears.