Dhcpsnooping Vlan Remove - Planet Networking & Communication WGSW-48000 User Manual

Parameters:
<vlan-id>
Mode
Global Config

dhcpsnooping vlan remove

Description:
This command is used to disable dhcp snooping in a specified vlan.
Syntax:
dhcpsnooping vlan remove from <vlan-id> to <vlan-id>
Parameters:
<vlan-id>
Mode
Global Config
dhcpsnooping static
Description:
This command is used to configure dhcp static entry.
dhcpsnooping static add ip
Description:
This command is used to add a static dhcp entry.
Syntax:
dhcpsnooping static add ip <A.B.C.D> mac <mac-address> port <port-id> vid <vlan-id>
Parameters:
<A.B.C.D>
<mac-address>
<port-id>
<vlan-id>
Mode
Global Config
dhcpsnooping static delete ip
Description:
This command is used to delete a static dhcp entry.
Syntax:
dhcpsnooping static delete ip <A.B.C.D> mac <mac-address> port <port-id> vid <vlan-id>
Parameters:
254
User's Manual of WGSW-48000