Show Rate-Limit - Planet Networking & Communication WGSW-48000 User Manual

This command is used to displays all interfaces' status
Syntax:
show port-security all
Mode
Privileged Mode

show rate-limit

Description:
This command is used to displays ingress and egress rate limit information
show rate-limit port
Description:
This command is used to specify an switch interface
Syntax:
show rate-limit port <port-ID>
Parameters:
<port-ID>
Mode
Privileged Mode
Example
Switch#Show rate-limit port 1
Switch#Show rate-limit port g
show rate-limit all
Description:
This command is used to displays all interfaces' status
Syntax:
show rate-limit all
Mode
Privileged Mode
show running-config
Description:
This command is used to displays switch running config
Syntax:
show running-config
184
User's Manual of WGSW-48000