Tacplus Add Server - Planet Networking & Communication WGSW-48000 User Manual

tacplus authen_type {local | tacplus | localandtacplus}
Parameters:
{local | tacplus | localandtacplus}
Mode
Global Config

tacplus add server

Description:
This command is used to add a new TACACS+ server and set server IP address, priority, key string, authentication port and
timeout for reply.
Syntax:
tacplus add server <IP_addr> priority <0-65535> key <key string> port <auth port id> timeout <1-30>
Parameters:
<IP_addr>
<0-65535>
<key string>
<auth port id>
<1-30>
Mode
Global Config
tacplus del server
Description:
This command is used to delete a TACACS+ server.
Syntax:
tacplus del server <IP_addr>
Parameters:
<IP_addr>
Mode
Global Config
green-eth
Description:
This command is used to enable/disable green Ethernet function. Enable green Ethernet mode will reduce system power
consumption when the link is not present.
Syntax:
green-eth { enable | disable }
Parameters:
251
User's Manual of WGSW-48000