Product Specification - Planet Networking & Communication WGSW-48000 User Manual

1.5 Product Specification

Product
Hardware Specification
Copper Ports
SFP / mini-GBIC slots
Switch Architecture
Switch Fabric
Switch throughput
Address Table
Share data Buffer
Flow Control
Jumbo Frame
LED
Reset Button
Dimension (W x D x H)
Weight
Power Consumption
Power Requirement
Layer F function
T
Management Interface
Port configuration
Port Status
VLAN
Bandwidth Control
Link Aggregation
QoS
W GSW-48000
T T
48-Port 10/100/1000Mbps with 4 Shared SFP Managed Gigabit Switch
48 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
4 1000Base-SX/LX SFP interfaces, shared with Port-23, Port-24, Port-47 and Port-48
Store-and-forward
96Gbps / non-blocking
71.4Mpps
8K MAC address table with Auto learning function
4 Mbits
C
Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex
9K
Power, Link/Act per port
< 10 sec: System reboot
> 10 sec: Factory Default
430 x 350x 44.5 mm, 1U height
3.5 KG
74 Watt / 252.34 BTU (Maximum)
AC 100~240V, 50/60Hz
Console, Telnet, SSH, Web Browser, SSL, SNMPv1, v2c and v3
Port disable/enable.
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection.
Flow Control disable / enable.
Display each port's speed duplex mode, link status, Flow control status. Auto negotiation
status, trunk status.
IEEE 802.1Q Tag-based VLAN
GVRP for VLAN Management
Up to 255 VLANs groups, out of 4041 VLAN IDs
Private VLAN Edge (PVE) supported
Ingress Rate Limit
Egress Traffic Shaper
IEEE 802.3ad LACP / Static Trunk
Supports 14 groups of 8-Port trunk
Traffic classification based on 802.1p priority, DS/TOS field in IP Packet
25
User's Manual of WGSW-48000