Storm-Control - Planet Networking & Communication WGSW-48000 User Manual

storm-control

Description:
Enable/disable storm control.
Syntax:
storm-control {enable | disable}
Parameters:
{enable | disable}
Mode
Interface Config
storm-control broadcast
Description:
This command storm control for broadcast only, and limited value :0,64,256,1024,10240,65536.102400,1024000,which the
unit is Kbps and 0 means no limit.
Syntax:
storm-control broadcast <rate>
Parameters:
<rate>
Mode
Interface Config
storm-control broadcast-multicast
Description:
This command storm control limited value :0,64,256,1024,10240,65536.102400,1024000,which the unit is Kbps and 0 means
no limit.
Syntax:
storm-control broadcast-multicast <rate>
Parameters:
<rate>
Mode
Interface Config
storm-control broadcast-unknown
Description:
This command storm control limited value :0,64,256,1024,10240,65536.102400,1024000,which the unit is Kbps and 0 means
no limit.
Syntax:
storm-control broadcast-unknown <rate>
Parameters:
268
User's Manual of WGSW-48000