Set Static-Mcast Name <Word>Delete - Planet Networking & Communication WGSW-48000 User Manual

set static-mcast name <WORD> add vid <vlan-ID> mac <mac-addr>member port <port list>
Parameters:
<vlan-ID>
<mac-addr>
<port list>
Mode
Global Config
set static-mcast name <WORD>delete
Description:
This command delete a static multicast group.
Syntax:
set static-mcast name <WORD>delete
Mode
Global Config
6.3.12 SNMP Command
snmp notify
Description:
This command configures snmp notification.
Syntax:
snmp notify {enable|disable}
Parameters:
{enable|disable}
Mode
Global Config
snmp group add
Description:
This command create a snmp group.
Syntax:
snmp group add <WORD>version <1-2>
Parameters:
<WORD>
<1-2>
Mode
226
User's Manual of WGSW-48000