Lldp - Planet Networking & Communication WGSW-48000 User Manual

4.10 LLDP

Link Layer Discovery Protocol (LLDP) is used to discover basic information about neighboring devices on the local broadcast
domain. LLDP is a Layer 2 protocol that uses periodic broadcasts to advertise information about the sending device. Advertised
information is represented in Type Length Value (TLV) format according to the IEEE 802.1ab standard, and can include details
such as device identification, capabilities and configuration settings. LLDP also defines how to store and maintain information
gathered about the neighboring network nodes it discovers.
Link Layer Discovery Protocol - Media Endpoint Discovery (LLDP-MED) is an extension of LLDP intended for managing
endpoint devices such as Voice over IP phones and network switches. The LLDP-MED TLVs advertise information such as
network policy, power, inventory, and device location details. LLDP and LLDP-MED information can be used by SNMP
applications to simplify troubleshooting, enhance network management, and maintain an accurate network topology.
4.10.1 LLDP Settings
This page allows the user to inspect and configure the current LLDP port settings. The LLDP settings screen in
appears.
The page includes the following fields:
Object
• Advertised Interval
• Hold value
• Transmit Delay
Figure 4-10-1 LLDP Settings screenshot
Description
The interval at which LLDP frames are transmitted on behalf of this LLDP agent.
A multiplier to Advertised interval. The result would be the TTL value for the information
advertised.
The delay between successive LLDP frame transmissions initiated by value/status
changes in the local system
129
User's Manual of WGSW-48000
Figure 4-10-1