Snmp Community Add - Planet Networking & Communication WGSW-48000 User Manual

snmp community add

Description:
This command creates a community.
Syntax:
snmp community add <community name> group <group name> mgmt-ip <ip-addr>
Parameters:
<community name>
<group name>
<ip-addr>
Mode
Global Config
snmp community delete
Description:
This command deletes a community.
Syntax:
snmp community delete <community name>
Parameters:
<community name>
Mode
Global Config
snmp trapstation add
Description:
Create a snmp trap station.
snmp trapstation add <ip-addr> community <community name> type bootup trap-version
Description:
Send trap when system reboot
Syntax:
snmp trapstation add <ip-addr> community <community name> type bootup trap-version {1|2}
Parameters:
{1|2}
Mode
Global Config
228
User's Manual of WGSW-48000