Mode
Global Config
spanning-tree port root-guard
Description:
This command is used to configure stp root guard.
Syntax:
spanning-tree port root-guard {enable|disable} ports <port-list>
Parameters:
{enable|disable}
<port-list>
Mode
Global Config
spanning-tree priority
Description:
This command configures RSTP bridge priority value.
Syntax:
spanning-tree priority <0-61440>
Parameters:
<0-61440>
Mode
Global Config
spanning-tree mst
Description:
Configure a multiple spanning tree instance.
spanning-tree mst instance
Description:
This command creates or removes a MST instance
spanning-tree mst instance add
Description:
This command creates a MST instance.
Syntax:
spanning-tree mst instance add vlan <vlan list> mstpid <MST ID>
Parameters:
vlan
236
User's Manual of WGSW-48000