Ceramic Logs Installation - Valor 530 Direct Vent Installation Manual

15.2. Ceramic Logs Installation

(See Section 15.3 for ceramic coals)
1. Place the base log on the supports in the firebox and against the firebox back. See figure 72.
2. Place the rear log over the base log. Locate the holes in the top log into the pegs in the base log. See figure 73.
3. Place the front log behind the metal lip at front of the firebox. See figure 74.
4. Place the right side log in the hollow at right of the base log. Rest the narrow nose of this log on the projection at front
center of the base log – It is important that the narrow nose does not drop down to touch the burner . See figure 75.
5. Place the left side log on base log at the left side. Locate its nose tip behind the nose of the right side log. It is important
that the narrow nose does not drop down to touch the burner. See figure 76.
Figure 73
Figure 75
Manufactured by Miles Industries Ltd., British Columbia, Canada
38
Figure 74
Figure 76