Dedicated Micros SD Excel Installation Manual page 85

IMPORTANT: The Remote codec option is only applicable for NetVu Connected cameras.
Note: Additional IP cameras ( further to existing local camera channels) are remote codec only.
Therefore any NetVu connected cameras will be applied above local camera level.
When 'Simple Stream' and 'Recode Stream' are selected via 'IP Mode', the following options will
be available:
URL
Port
Chan
PPS
Recode
When 'Remote Codec' is selected via 'IP Mode', the following options will be available:
IP Address
Channel
IP Camera (Yellow)
Camera (Blue)
Refresh (Purple)
Recode Stream - When selected, the unit will recompress
the incoming IP stream to the record
profile settings established for this camera
channel in the Profile Record menu
(Record Settings->Profile Record). This
feature is only accessable with 3rd party
IP camera when the 3rd party IP camera
license has been enabled.
Remote codec When selected, the unit will utilise
the codec in the remote NetVu connected
video server/camera as if it was directly
connected inside the DVR. Thus the user
can change Multimode profiles and
perform additional activities such as VMD
and Activity Detection as if the codec
was an integral part of the DVR. If 'Remote
codec' is selected, the loading on the unit's
internal codecs will be reduced.
Enter the URL address of the image source.
If required, edit the port input data. This will default to 80 (HTTP).
If required, edit the channel input data.
Edit the PPS (Pictures per Second) recording settings.
Select to activate the recode option.
Enter the URL address of the image source.
If required, edit the channel input data.
Select to open the Camera->IP Stream Inputs page.
Select to open the Serial->Camera page.
Refreshes the information on the current page.
85