Dedicated Micros SD Excel Installation Manual page 78

IMPORTANT:
Fail Rep
Telemetry
Default to preset
after X mins
Note: The following settings will change depending on the type of camera connected.
If a Local Analog Camera is selected
Colour
Brightness
78
The menu options displayed will differ depending on the camera 'Type'
selected here.
Select this option to generate a Failure report in the event of camera
connection failure.
If a telemetry capable camera is connected, the appropriate control
protocol should be selected from the accompanying drop down list,
refer to 'Appendix G' for details of supported
telemetry protocols.
If a telemetry camera has been assigned a preset position, select
the chosen preset position here. Enter the time period (in minutes) of
inactivity which will result in the camera moving to its preset position,
refer to Viewer menus->Program Page for guidance on assigning
camera presets.
Refer to 'Default to preset'.
Select a colour value from -8 to +8 via the slidebar or enter a number
directly into the accompanying textbox.
Select a contrast value from -8 to +8 via the slidebar or enter a number
directly into the accompanying textbox.
SD Excel