Event Settings - Dedicated Micros SD Excel Installation Manual

Event Settings

This menu allows actions to be established and configured for the Oracle Dome camera following an
alarm event. A Home position can be established for the camera and the delay time set for what period of
inactivity is required before the camera will be sent to its home position.
Camera
Camera Title
Event Name
Type
Action
Relay
Home (Grey)
Action
Delay
Save (Grey)
Selected camera channel.
Displays the title assigned to the selected camera channel.
If required, enter a specific name for the alarm event.
Select the alarm type from:
EOL (End of Line), NC (Normally Closed), NO (Normally Open)
or Disabled.
Select a preset position or a patrol action for the camera upon alarm
event.
Select an action for the relay. Select 'Momentary' for the relay to
momentarily switch state. Select 'Duration' to switch relay status for the
duration of the alarm.
Select to send the camera to its predetermined home position.
Select a preset or patrol from the accompanying drop down list. This
preset/patrol will now be set as the cameras 'home' position.
Select the time ( in seconds) for which the camera is inactive i.e. no
operator input, before returning to its home position.
Select to store Event Settings to the unit and the Oracle Dome camera
memory.
171