Quick Start Guide; Procedure - FLIR Exx Series User Manual
Hide thumbs
Also See for Exx Series:
- User manual (206 pages) ,
- Getting started (148 pages) ,
- Getting started manual (112 pages)
Table of Contents
Advertisement
6
Quick Start Guide
6.1 Procedure
Follow this procedure:
1. Put a battery into the battery compartment.
2. Charge the battery for 4 hours before starting the camera for the first time, or until the
green battery condition LED glows continuously.
3. Insert a memory card into a card slot.
4. Push the
button to turn on the camera.
5. Aim the camera towards the object of interest.
6. Focus the camera by rotating the focus ring.
7. Push the Preview/Save button (the trigger) fully down to save an image directly.
Note
Whether or not the image will be saved directly depends on the functionality of the Autofocus/Save
button. The functionality can be changed on the Preferences tab (Mode > Settings > Preferences).
8. Do one of the following:
• Remove the memory card and insert it in a card reader connected to a computer.
• Connect a computer to the camera using a USB mini-B cable.
9. Move the image from the card or camera, using a drag-and-drop operation.
Note
You can also move the images to the computer using Flir Tools, which comes with your camera. In
Flir Tools you can analyze the images and create PDF reports.
#T559597; r.7857/7857; en-US
12
Advertisement
Table of Contents
