Setting Up Thermal Fusion; Setting Up Picture-In-Picture - FLIR Exx Series User Manual

15 Working with image modes
Type
Interval
Picture-in-Picture

15.5 Setting up Thermal fusion

Follow this procedure:
1. Push to display the menu system.
2. In the menu system, select
3. In the submenu, select Thermal fusion.
4. Push .
5. To change the portion of infrared in the image, do one of the following:
• Push the joystick left/right to select
the bottom temperature level.
• Push the joystick left/right to select
the top temperature level.
• Push the joystick left/right to select
the top and bottom temperature level at the same time, and left/right to change the
temperature span.
Note
How to use thermal fusion in manual mode is described above.
When using thermal fusion in automatic mode, the temperature levels for the thermal fusion will be
based on the temperature levels inside the aiming frame that is displayed in the middle of the image.

15.6 Setting up picture-in-picture

Follow this procedure:
1. Push to display the menu system.
#T559597; r.7857/7857; en-US
Image
. This will display a submenu.
, then push the joystick up/down to change
, then push the joystick up/down to change
, then push the joystick up/down to change
39