Moving Or Resizing A Measurement Tool; General; Procedure - FLIR Exx Series User Manual

16 Working with measurement tools
6. In the submenu, select one of the following:
• Above. This will apply a contrasting color to all pixels with a temperature above
one or more set temperature levels.
• Below. This will apply a contrasting color to all pixels with a temperature below
one or more set temperature levels.
• Interval. This will apply a contrasting color to all pixels with a temperature between
two or more set temperature levels.
• Humidity. This will apply a contrasting color to all pixels with a temperature below
a threshold calculated by humidity parameters. For more information about this,
see 18 Working with alarms and isotherms, page 47.
• Insulation. This will apply a contrasting color to all pixels with a temperature below
a threshold calculated by insulation parameters. For more information about this,
see 18 Working with alarms and isotherms, page 47.
This will display a flag in the temperature scale. See the image below.
7. To change the temperature level, do one of the following:
• Tap and drag the flag up/down.
• Move the navigation pad up/down.

16.3 Moving or resizing a measurement tool

16.3.1 General

You can move and resize a measurement tool.

16.3.2 Procedure

Note
• This procedure assumes that you have previously laid out a measurement tool on the screen.
• You can also move and resize the measurement tool using your finger directly on the touchscreen
LCD.
Follow this procedure:
1. Push or tap the screen to display the menu system.
2. Use the navigation pad to go to
3. Push to display a submenu.
4. Use the navigation pad to go to
5. Push and select the measurement tool that you want to move or resize.
#T559597; r.7857/7857; en-US
(Tools).
(Adjust tools).
42