FLIR Exx Series User Manual page 15

2
Warnings & Cautions
• Only use the correct equipment to discharge the battery. If you do not use the cor-
rect equipment, you can decrease the performance or the life cycle of the battery. If
you do not use the correct equipment, an incorrect flow of current to the battery
can occur. This can cause the battery to become hot, or cause an explosion and in-
jury to persons.
• Make sure that you read all applicable MSDS (Material Safety Data Sheets) and warn-
ing labels on containers before you use a liquid: the liquids can be dangerous.
• If mounting the A3xx pt/A3xx f series camera on a pole, tower or any elevated loca-
tion, use industry standard safe practices to avoid injuries.
CAUTION
• Do not point the infrared camera (with or without the lens cover) at intensive energy
sources, for example devices that emit laser radiation, or the sun. This can have an
unwanted effect on the accuracy of the camera. It can also cause damage to the de-
tector in the camera.
• Do not use the camera in a temperature higher than +50°C (+122°F), unless specified
otherwise in the user documentation. High temperatures can cause damage to the
camera.
• (Applies only to cameras with laser pointer:) Protect the laser pointer with the protec-
tive cap when you do not operate the laser pointer.
• Applies only to cameras with battery:
• Do not attach the batteries directly to a car's cigarette lighter socket, unless a spe-
cific adapter for connecting the batteries to a cigarette lighter socket is provided by
Flir Systems.
• Do not connect the positive terminal and the negative terminal of the battery to
each other with a metal object (such as wire).
• Do not get water or salt water on the battery, or permit the battery to get wet.
• Do not make holes in the battery with objects. Do not hit the battery with a hammer.
Do not step on the battery, or apply strong impacts or shocks to it.
• Do not put the batteries in or near a fire, or into direct sunlight. When the battery
becomes hot, the built-in safety equipment becomes energized and can stop the
battery charging process. If the battery becomes hot, damage can occur to the
safety equipment and this can cause more heat, damage or ignition of the battery.
• Do not put the battery on a fire or increase the temperature of the battery with heat.
• Do not put the battery on or near fires, stoves, or other high-temperature locations.
• Do not solder directly onto the battery.
• Do not use the battery if, when you use, charge, or store the battery, there is an un-
usual smell from the battery, the battery feels hot, changes color, changes shape,
or is in an unusual condition. Contact your sales office if one or more of these prob-
lems occurs.
• Only use a specified battery charger when you charge the battery.
• The temperature range through which you can charge the battery is ±0°C to +45°C
(+32°F to +113°F), unless specified otherwise in the user documentation. If you
charge the battery at temperatures out of this range, it can cause the battery to be-
come hot or to break. It can also decrease the performance or the life cycle of the
battery.
• The temperature range through which you can discharge the battery is −15°C to
+50°C (+5°F to +122°F), unless specified otherwise in the user documentation.
Use of the battery out of this temperature range can decrease the performance or
the life cycle of the battery.
• When the battery is worn, apply insulation to the terminals with adhesive tape or
similar materials before you discard it.
• Remove any water or moisture on the battery before you install it.
• Do not apply solvents or similar liquids to the camera, the cables, or other items. This
can cause damage.
• Be careful when you clean the infrared lens. The lens has a delicate anti-reflective
coating.
• Do not clean the infrared lens too vigorously. This can damage the anti-reflective
coating.
#T559597; r.7857/7857; en-US
5