Setting Up An Insulation Alarm - FLIR Exx Series User Manual

18 Working with alarms and isotherms

18.1.5 Setting up an Insulation alarm

Follow this procedure:
1. Push to display the menu system.
2. Use the navigation pad to go to
3. Push to display a submenu.
4. Use the navigation pad to go to
5. Push . This will display a submenu.
6. In the submenu, select Insulation. This will display a dialog box where you can set the
necessary parameters:
• Outdoor temperature: The current outdoor temperature.
• Indoor temperature: The current indoor temperature.
• Thermal index: The insulation level, an integer between 0 and 100.
7. Push .
The setup is now complete, and an isotherm will be displayed when the parameters
are met.
#T559597; r.7857/7857; en-US
.
.
48