11
Pairing Bluetooth devices
11.1 General
Before you can use a Bluetooth device with the camera, you need to pair the devices.
11.2 Procedure
Follow this procedure:
1. Go to
(Mode) and then choose Settings.
2. Go to the Connectivity tab.
3. Activate Bluetooth.
Note
You also need to activate Bluetooth connectivity on the external device.
4. Select Add Bluetooth device.
5. Select Scan for Bluetooth device, and wait until a list of available devices is dis-
played. This will take about 15 seconds.
6. When a Bluetooth device is found, select the device to add it. The device is now
ready to be used.
Note
•
You can add several devices.
•
You can remove an added device by selecting the device and and then selecting Remove.
•
After adding a MeterLink device, such as the Extech MO297 or EX845, the result from the meter will
be visible in the measurement result table.
•
After adding a Bluetooth-enabled headset, it is ready to be used in camera preview mode.
•
It is also possible to add live snapshot values from MeterLink devices in preview mode.
#T559597; r.7857/7857; en-US
25