Handling The Camera; Charging The Battery; Using The Power Supply To Charge The Battery; Using The Stand-Alone Battery Charger To Charge The Battery - FLIR Exx Series User Manual

13

Handling the camera

13.1 Charging the battery

Note
You must charge the battery for four hours before you start using the camera for the first time.

13.1.1 Using the power supply to charge the battery

13.1.1.1 Procedure

Follow this procedure:
1. Connect the power supply cable plug to the power connector on the camera.
2. Connect the power supply mains-electricity plug to a mains socket.
3. Disconnect the power supply cable plug when the green light of the battery condition
LED indicator is continuous.

13.1.2 Using the stand-alone battery charger to charge the battery

13.1.2.1 Explanation
Type of signal
The blue LED flashes.
The blue LED glows continuous.
13.1.2.2 Procedure
Follow this procedure:
1. Put the battery in the battery charger.
2. Connect the power supply cable plug to the connector on the battery charger.
3. Connect the power supply mains-electricity plug to a mains socket.
4. Disconnect the power supply cable plug when the blue LED on the battery charger is
continuous.

13.2 Turning on the camera

13.2.1 Procedure
Follow this procedure:
1. To turn on the camera, push and release the

13.3 Turning off the camera

13.3.1 Procedure
Follow this procedure:
1. To turn off the camera, push and hold the
#T559597; r.7857/7857; en-US
Explanation
The battery is being charged.
The battery is fully charged.
button.
button for more than 0.2 second.
27