Creating And Setting Up A Difference Calculation; General; Procedure - FLIR Exx Series User Manual

16 Working with measurement tools
6. Push the joystick. The measurement tool will now be displayed with one or more han-
dles, which you use to move or resize the tool.
Figure 16.1 Spot measurement tool.
Figure 16.2 Area measurement tool.
7. Use the navigation pad to move or resize the measurement tool.

16.4 Creating and setting up a difference calculation

16.4.1 General

A difference calculation gives the difference between the values of two known measure-
ment results.

16.4.2 Procedure

Note
This procedure assumes that you have previously laid out at least two measurement tools on the
screen.
Follow this procedure:
1. Push or tap the screen to display the menu system.
2. Use the navigation pad to go to
3. Push to display a submenu.
4. Use the navigation pad to select
5. Push . This will display a dialog box where you can select the measurement
tools that you want to use in the difference calculation.
6. Push . The result of the difference calculation is now displayed in the result
table.
#T559597; r.7857/7857; en-US
(Tools).
(Add difference).
43