Inspire M1 Assembly & Operation Manual page 9

30
Step 3
DO NOT TIGHTEN ANY HARDWARE IN THIS STEP
A Attach the Left Base Brace (13) and Right Base Brace (14) using a M10x125 Hex Bolt
(54), 2- M10 Washers (62), and 1- M10 Lock Nut (65).
B Attach a 3-1/2" Pulley (41) to both sides of the Rear Base (12) using 2- M10x110 Hex
bolts (53), 4- M10 Washers (62), and 2- M10 Lock Nuts (65).
14
2-M10x110 Hex Bolts
12
13
PAGE 6
4-M10 Flat Washers
2-M10 Lock Nut
13
31
1-M10x125 Hex Bolts
2-M10 Flat Washers
1-M10 Lock Nut