Advertisement
Quick Links
LP2-M5 Attachment Kit
Use this addendum to attach the LP2 to the M5 machine.
Verify all parts and hardware in this kit using this
addendum.
Verify all parts and hardware for the LP2 base unit using
the Owner's Manual in the LP2 box.
www.inspirefitness.net
by Health In Motion LLC
Mar 2012
Advertisement
Related Manuals for Inspire LP2-M5
Summary of Contents for Inspire LP2-M5
- Page 1 LP2-M5 Attachment Kit Use this addendum to attach the LP2 to the M5 machine. Verify all parts and hardware in this kit using this addendum. Verify all parts and hardware for the LP2 base unit using the Owner’s Manual in the LP2 box.
-
Page 2: Parts & Hardware List
PARTS & HARDWARE LIST The following parts are in the LP2-M5 Attachment Kit box Item Parts Description Item Hardware Description Rec'd Rec'd Attachment Arm Bolt, M10*45 3 1/2" Pulley Bolt, M10*95 Floating Pulley Plates Bolt, M10*105 LP2-M5 Cable Bolt, M10*115... - Page 3 Leg Press Base Attachment Arm Main Frame STEP 2 2 – M10 x 125 Hex Bolts 1 – M10 x 120 Hex Bolt Before attaching Attachment Arm, STEP 1 5 – M10 Flat Washers remove this M10 x 100 Hex Bolt connecting the Corner Bracket to 2 –...
- Page 4 Press Arms Leg Press Base Dual Pulley Mount Short end of tube STEP 3 faces outward STEP 4 1 – 1/2” x 10 ¾” Hex Bolt 2 – 5” Hex Bolts 2 – 1/2” Flat Washers 4 – 3/8” Flat Washers 1 –...
- Page 5 Attachment Arm STEP 8 2 – 3 ½” Pulleys Pulley-7 & 8 1 – M10 x 115 Hex Bolt 2 – M10 Flat Washers STEP 7 1 – M10 Lock Nut 2 – 3 ½” Pulleys 2 – 2” Hex Bolts 4 –...
- Page 6 Previously installed 3 ½” Pulley And Lat Upper Cable STEP 9 Remove these items from machine. Save Washers and Lock Nut for use in Step 10. STEP 10 2 – M10 x 45 Hex Bolts 4 – M10 Flat Washers Pulley 9 2 –...
- Page 7 STEP 13 Back Pad Stem 2 – 1” Hex Bolts Seat Base 2 – 3/8” Flat Washers STEP 12 2 – 2 ½” Hex Bolts 4 – 3/8” Flat Washers 2 – 3/8” Lock Nuts Seat Pad STEP 15 Seat Pad Handles Seat Base Leg Press Base...
- Page 8 STEP 17 4 – 3/8” Barrel Spacers Foot Plates Rubber Bumper Pads 4 – 1” Button Head Bolts 4 – 3/8” Small OD Washers 4 – 3/8” Thin Lock Nuts 3/8” Barrel Spacer STEP 16 STEP 18 Press Arms Step 16: Install Two Adjustable Bumpers. Step 17: Attach Foot Plates to Press Arms with Rubber Four (3/8”...
- Page 9 Adjustable Bumpers Store Locking Rod here STEP 19 Press Arms Step 19: To connect both Press Arms together, slide Locking Rod thru both Press Arm Brackets and tighten Adjustable Bumpers against Locking Rod to secure Locking Rod in place. Store Locking Rod in Leg Press Base as shown when not in use. Page 8...