Inspire M1 Assembly & Operation Manual page 15

3-M8x25 Flat-Head Bolts
1-M10x75 Button Head Bolt
1-M10 Flat Washer
Step 9
DO NOT TIGHTEN ANY HARDWARE IN THIS STEP
A Attach the Top Beam Assembly (16) to the Upper Swivel Pulley Bracket (19) using a
M10x75 Button Head Bolt (57) and a M10 Flat Washer (62).
B Slip in the Top Beam Assembly (16) onto the Main Upright (11) using 3- M10x25 Flat
Head Bolts (56), 6- M10 Washers (62), and 3- M10 Lock Nuts (65). The Flat Head
Bolts (56) must be inserted from back of the unit to the front.
C Bolt the top of the Guide Rods (3) to the Main Upright (11) and Top Beam
Assembly(16) using 2- M10x45 Hex bolts (47), 4- M10 Washers (62), and 2- M10
Lock Nuts (65).
3-M8 Flat Washers
3-M8 Lock Nuts
16
19
PAGE 12
11