Inspire M1 Assembly & Operation Manual page 18

25
4-M10x205 Hex Bolts
8-M10 Flat Washers
4-M10 Lock Nuts
Step 12
A Attach Pinned Linkage Bar (25) to the front, left side of the Main Base (1) using 1-
M10x205 Hex bolts (55) and 1- M10 Washers (62).
B Attach 3 Linkage Bars (24) to the Main Base (1) using 1- M10x205 Hex bolt (55), 3-
M10 Washers (62), and 3- M10 Lock Nuts (65).
C Attach the Seat Frame (23) to the Linkages (24, 25) using 2- M10x205 Hex bolts
(55), 4- M10 Washers (62), and 2- M10 Lock Nuts (65).
Tighten all 4 screws securely then loosen the nuts by ½ a turn. If the seat is binding and
too difficult to adjust then it may be necessary to loosen the nuts more. However, the bolts
must not be too loose.
23 24
PAGE 15
1