Inspire M1 Assembly & Operation Manual page 14

Step 8
DO NOT TIGHTEN ANY HARDWARE IN THIS STEP
A Attach the Upper Swivel Pulley Bracket (19) to the Upright Supports (15) using 8-
M8x25 Button Head Bolts (58), 16- M8 Washers (63), and 8- M8 Lock Nuts (66).
NOTE: It may be necessary to tighten some of the bolts in order to install the rest of the
bolts. If any bolts are tightened down they must be loosened before proceeding to the
next step.
19
15
PAGE 11
8-M8x25 Hex Bolts
16-M8 Flat Washers
8-M8 Lock Nuts
15