Step 11
A
Attach 2 Swivel Pulleys (22) to the Upper Swivel Pulley Bracket (19) using 2-
M12x65 Hex bolts (60), 1- M12 Washers (61), and 2- M12 Lock Nuts (64).
B
Attach 2 Swivel Pulleys (22) to the Center Upright Base (18) using 2- M12x65
Hex bolts (60), 1- M12 Washers (61), and 2- M12 Lock Nuts (64).
C
Attach 2 Swivel Pulleys (22) to the Rear Base (12) using 2- M12x65 Hex bolts
(60), 1- M12 Washers (61), and 2- M12 Lock Nuts (64).
NOTE: The M12 bolts must be installed in the direction shown in the above
drawing such that the head of the bolt faces the back of the unit.
Tighten hardware now.
22
18
22
PAGE 14
12
22