Assembly Instructions - Inspire M1 Assembly & Operation Manual

Step 1
DO NOT TIGHTEN ANY HARDWARE IN THIS STEP
A Attach the Main Upright (11) to the Main Base (1) using 2- M10x40 Hex bolts (46) and
2- M10 Washers (62).
B Attach 2- 4-1/2" Pulleys (42) to the Main Upright (11) using 2- M10x50 Hex bolts
(48), 4- M10 Washers (62), and 2- M10 Lock Nuts (65).
2-M10x50 Hex Bolts
4-M10 Flat Washers
2-M10 Lock Nuts
1
PAGE 4
42
11
2-M10x40 Hex Bolts
2-M10 Flat Washers