Inspire M1 Assembly & Operation Manual page 11

4-M10x85 Hex Bolts
8-M10 Flat Washers
4-M10 Lock Nuts
Step 5
DO NOT TIGHTEN ANY HARDWARE IN THIS STEP
A Attach the Center Upright Brace (18) to the Main Upright (11) using 1- M10x75
Hex bolts (50), 2- M10 Washers (62), and 1- M10 Lock Nuts (65). Then attach
the Center Upright Brace (18) to the Upright Supports (15) using 4- M10x85 Hex
bolts (51), 8- M10 Washers (62), and 4- M10 Lock Nuts (65).
15
18
PAGE 8
11
1-M10x75 Hex Bolts
2-M10 Flat Washers
1-M10 Lock Nut