Set Arm Password - EverFocus EFC301FR User Manual

Pressing "*" before pressing "#" for confirmation, the new password will not take effect and
the system will return to the previous menu.

4.4.7 Set ARM Password

Before protection setup and withdrawal of the controller, the alarm administration
password must be input through the keyboard. The default alarm administration password
is 00000000.
In the "System Setting" menu, scroll to "Set ARM Password" menu item and press "#" to
enter the "Set ARM Password" interface.
After inputting a new system administration password twice, press "#" to confirm and the
system will display whether the new password takes effect. If the passwords entered are
different, the system will prompt to reset.
Input SYS PIN
_ _ _ _ _ _
Cancel OK
Setting updated
successfully
Set Time
Auto Daylight
Set SYS Password
Set ARM Password
Input ARM PIN
_ _ _ _ _ _
Cancel OK
Setting updated
successfully
TCP/IP Network Access Controller
Repeat:
_ _ _ _ _ _
Cancel OK
Passwords mismatch
Please retry
Repeat:
_ _ _ _ _ _
Cancel OK
Passwords mismatch
Please retry
24