Table of Contents
Advertisement
TCP/IP Network Access Controller
Chapter
12
12 Access Rule
12.1 Date Type
Click the "Access Control" "Access Rule," select "Date Type" to enter the date setting
page; see the figure below:
Figure 12-1 Date setting
12.1.1 Add Date
In the operating button region, click the "Add" button, then the dialog box reading "Add
Date" pops up.
Figure 12-2 Add date
The controller supports the setting of 10 date types, including from Sunday to Saturday (7
types), user-defined 1, user-defined 2, and user-defined 3, of which Sunday to Saturday are
automatically set according to the calendar and user can define the user-defined 1,
user-defined 2 and user-defined 3 as required.
In this manual, the user-defined 1, user-defined 2 and user-defined 3 are all regarded as
holidays. Holiday setting refers to the three date types. The EverFocus controller supports
255 holiday settings.
83
Advertisement
Table of Contents
