Multiple Card Addition Methods - EverFocus EFC301FR User Manual

and the door entry/exit mode can be set.
4) After settings the mode of various date types, click the "Save" button, then the new
schedule is added into the Group Schedule list.
6.1.1.4 Set Access Group
Click the menu bar "Access Control"  "Access Rule"  "Access Group" to enter the
interface. Following are instructions for how to add an access group (for detailed settings,
please refer to 12.4.1 Add Access Group).
Operation Procedures:
1) Input the name of a new access group in the "access group name" textbox.
2) Select the unlocking levels corresponding to the locks.
3) Select a schedule name.
4) Click the "Save" button to finish the settings.

6.1.2 Multiple Card Addition Methods

The software provides multiple methods to add cards into the system. Any method can be
selected to realize this function. Following are instructions for how to add a card and
allocate it into the corresponding control group.
The default control group is "Full Granted" and the default password is "000000." First,
select the format of the card to be added.
6.1.2.1 Rapid Card Addition
When a user logs in to the software and swipes a card on the controller, the card swiping
record will be displayed in the system event records and can be copied (for details, please
refer to 6.3.4.2 Illegal Card Swiping Records).
Operation Procedures:
1) Swipe the card to be added to the card reader connected with the controller in which
the card is added.
2) Log in to the software, then the card swiping record will appear in the system event
records (entry/exit card swiping records or illegal card swiping records). Copy the card
number.
3) Select the correct card format.
4) Add one new card in the card page, paste the card number in and click the "Save"
button to finish addition.
6.1.2.2 Card Page
Click the menu bar "Access Control"  "Card"  "Card Settings" to enter the page of card
settings. Following are instructions for how to add a card and allocate it into the access
group (for detailed settings, please refer to 4.5 Card Setting).
Operation Procedures:
1) Click the "Add" button to enter the card adding page.
2) Fill in card attributes.
3) If the Cardholder member is already in the system, allocate the card to one employee.
TCP/IP Network Access Controller
47