Getting Started; Quick Start; Set Access Rule - EverFocus EFC301FR User Manual

TCP/IP Network Access Controller
Chapter
6
6

Getting Started

This chapter will instruct how to rapidly set the EFC301F TCP/IP-based Access Control
integrated device through the browser using the identity of a super administrator and how
to realize door open by swiping a card and Attendance functions.

6.1 Quick Start

6.1.1 Set Access Rule

6.1.1.1 Set Date
Click the menu bar "Access Control"  "Access Rule"  "Date Type" to enter the interface
of data settings. Following are instructions for how to add a date (for detailed settings,
please refer to 12.1 Date Type).
Operation Procedures:
1) Select date cycling type.
2) Select date in the calendar.
3) Select date type.
4) Input remarks.
5) Click the "Save" button.
6.1.1.2 Set Door Schedule
Click the menu bar "Access Control"  "Access Rule"  "Door Schedule" to enter the
interface. Following are instructions for how to add a door schedule (for detailed settings,
please refer to 12.2 Door Schedule).
Operation Procedures:
1) Input the name of a new schedule in the textbox.
2) Click the time period of "Daysetting," set time period and entry/exit mode in the
pop-up dialog box, save and close the dialog box.
3) Click the "Save" button to save the settings.
6.1.1.3 Set Group Schedule
Click the menu bar "Access Control"  "Access Rule"  "Group Schedule" to enter the
interface. Following are instructions for how to add a group schedule (for detailed settings,
please refer to 12.3.1 Add Group Schedule).
Operation Procedures:
1) Click the "Add" button to enter the adding page.
2) Input the name of a new schedule in the textbox of "Schedule Name."
3) Click the time period of "Daysetting," a dialog box will pop up, in which the time period
46