Table of Contents
Advertisement
TCP/IP Network Access Controller
Chapter
9
9
Real-time Monitoring
9.1 Real-time Event
Select the system menu bar "System" "Real-time Monitoring" "Real-time Event" to
enter the real-time monitoring page; see the figure below:
Figure 9-1 Real-time event
As shown in the above figure, the real-time event monitoring page is divided into three
basic regions.
The control panel is positioned in the column on the leftmost side and has door status
indication icons for Door Open and Door Close and alarm indication icons for Protection
Setup, Protection Withdrawal, Alarm and Alarm Reset as well as a Logoff button.
The electronic map is positioned in the middle upper part and the real-time status icon of
the device displays the different status of the device, such as whether the door is open or
closed, if there is an alarm or not, etc.
The real-time event records of the controller are positioned in the middle part. It
automatically receives the event information of the controller and scrolls the event
information to display in real time. In case of accessing the page for the first time, the
events of the controller are sequentially listed according to the sequence of being received.
When receiving a new event, it automatically lists the latest event in the first line.
The cardholder information is positioned on the right side of the page and are used to
display the information of the cardholder who triggers the event of the controller. When
clicking to select the middle real-time event record, if the selected event contains the
cardholder information, the related information of the cardholder, such as photo, name,
gender, department, etc., will be displayed in the cardholder information column on the
rightmost side; if there is no information for the cardholder, the related contents in this
column are blank.
75
Advertisement
Table of Contents
