Set Network; Dhcp Setting; Set Ip Address - EverFocus EFC301FR User Manual

Press the numerical keys to input the address. The range is between 0000~9999. "#" to
confirm and the setting will take effect. Press "*" to exit and the setting will not take effect.
The default address is 0000.

4.10 Set Network

In the system main menu, select the "Set Network" menu item with numerical key "2" or "8"
and press "#" to enter this menu item. In the submenu items, select DHCP Setting, Set IP
Address or Reset Network Setting.

4.10.1 DHCP Setting

Select the "DHCP Setting" menu item and press function key "#" or numerical keys "5" or "6"
to enter the setting menu.
Press "#" key to switch between "ON" and "OFF". Press "*" to confirm the DHCP status
setting and exit.
If DHCP is ON, it will get an IP address after controller connected to internet.

4.10.2 Set IP Address

Select the "Set IP Address" item and press the function key "#" or numerical keys "5" or "6"
to enter the interface.
Address:
Cancel
DHCP Setting
Set IP Address
Reset Network Setting
DHCP Setting:
On
［#］to toggle
0000
OK
DHCP Setting:
［#］to toggle
40
TCP/IP Network Access Controller
Off