Table of Contents
Advertisement
TCP/IP Network Access Controller
Figure 12-5 Update data
After the setting of a certain date is finished, the setting of another date is the same. Select
the set date in the door region scheme setting page, click the "Copy" button to copy the set
date rules, click to select the date on which the rules are applied, and click the "Paste"
button in the operation bar, then the rules copy is finished.
12.3 Group Schedule
Click "Access Control" "Access Rule," select "Group Schedule" to enter the control group
scheme setting page; see the figure below:
Figure 12-6 Group schedule
12.3.1 Add Group Schedule
In the control group scheme setting page, click the "Add" button to enter the scheme
setting page.
Figure 12-7 Add control group scheme
86
Advertisement
Table of Contents
